mg chandran
Customer
Very good service & reasonable price and experienced technician team work 🙏
Chennai · Avadi — free site inspection
Costs, warranty, timelines and how we diagnose leaks — answered plainly.
General
Chennai and the surrounding industrial belt, plus Avadi and the north-west suburbs. Site inspection is free within our service area.
Yes, the site visit and assessment are free. A detailed thermal imaging survey with a written diagnosis report is charged separately and adjusted against the work if you award it to us.
Inspection usually within 24 to 72 hours depending on location. Start date depends on scope and weather, and we confirm it in the quotation.
Yes, and this is the right sequence for most buildings — waterproof first, let it cure, then paint. Doing them together avoids paying twice for scaffolding and access.
Yes, a written warranty whose duration depends on the specified system. Terms are stated on the quotation before you commit.
Regularly. We provide the documented survey, phased quotation, method statement and GST invoicing that committees and facility departments need.
waterproofing
No. The thermal survey is completely non-destructive. We only open the one confirmed spot at the time of repair, which is usually far smaller than the exploratory damage a conventional approach causes.
It is charged as a fixed inspection fee based on the built-up area surveyed, and it is adjusted against the repair cost if you award us the waterproofing work. Call us with your area and we will quote on the phone.
A typical apartment or independent house takes two to three hours. A factory or commercial block is scoped on site.
It reads surface temperature, not through-wall images. Moisture inside the structure changes the surface temperature above it, which is what makes the leak path visible.
waterproofing
It depends on the system. Mesh-reinforced acrylic, torch-applied APP membrane and PU coatings sit at different price points, and the condition of the existing slab decides how much preparation is needed. We give a fixed per-sq-ft rate after a free site inspection — no open-ended billing.
A typical independent house terrace takes three to five days including surface preparation, curing between coats and a wet test. Larger factory roofs are scheduled around your operations.
Yes — a written warranty, with the duration depending on the system specified. We also re-scan with the thermal camera after a wet test before handover.
Surface preparation and membrane application both need a dry substrate, so we schedule around rain. Emergency leak arrest with PU injection grouting can be done in wet conditions.
waterproofing
Reflective coatings typically bring the terrace surface temperature down substantially, and the rooms directly below feel noticeably cooler — most clients report a real difference in afternoon comfort and air-conditioning run time. The exact figure depends on your slab thickness, insulation and roof exposure.
Elastomeric and membrane-based reflective systems do provide waterproofing. A basic reflective paint does not. If your terrace already leaks, we specify a combined system rather than a plain coating.
A cool roof coating stays effective for several years, though reflectivity drops as dust accumulates. Periodic cleaning helps, and a recoat restores full performance.
waterproofing
Very often the water is not coming from the bathroom at all — it travels laterally from a terrace crack, a leaking concealed pipe or an external wall. This is exactly what the thermal survey settles before you spend money on the wrong repair.
For terrace and external work, no. For bathroom waterproofing that bathroom is out of use for a few days while the coating cures and the ponding test runs.
Yes. We handle full-building surveys for housing societies and provide the documented diagnosis report and phased quotation that committees usually need for approval.
waterproofing
Usually yes. We phase the roof into sections, work night shifts or weekends where required, and agree the sequence with your facility team before mobilising.
Yes — GST invoice, material datasheets, method statement, warranty certificate and before/after documentation including thermal scans.
Yes. PU injection grouting is specifically designed to be installed against active water ingress, so it does not need a dry window.
painting
It is quoted per sq ft of painted area and varies with the paint grade, the amount of surface preparation the building needs and the access method. We measure on site and give an itemised quotation that states the exact products.
Almost always one of three things — painting over loose old coating, painting over a damp wall without fixing the source, or skipping primer. We check for all three before quoting, and if there is active damp we recommend fixing that first.
Yes, both conventional scaffolding and rope access depending on the building and the site constraints. It is included in the quotation, not added later.
painting
Yes. We work room by room, sheet and mask furniture, use dust-controlled sanding and clean up at the end of each day so the house stays liveable.
A typical 2BHK takes about four to six days depending on how much putty and repair work is needed. We give you a day-wise schedule before starting.
Moisture is entering from outside the wall. Repainting will keep failing until the source is fixed. We thermal-scan to find it and quote the fix and the repaint together.
painting
Yes. We plan manpower to complete defined scope inside the shutdown period and phase the rest around live operations.
Yes — height work with proper harnesses and scaffolding, PPE, and compliance with your site induction and permit-to-work system.
Yes. Method statement, material datasheets and dry film thickness records are provided as part of handover documentation.
Send us a photo on WhatsApp and we will tell you what you are dealing with.
What homeowners and businesses across Chennai say about Om Engineering Services — unedited, from our Google Business Profile.
4.9 out of 5
Based on 121 Google reviews