Skip to content
Om Engineering Services — Waterproofing & Building Painting SpecialistsOm EngineeringWaterproofing & Painting

Terrace Waterproofing Services in Chennai

Chennai terraces fail for three reasons — dead slope that ponds water, untreated shrinkage cracks, and parapet junctions left open. We correct all three, then lay a mesh-reinforced membrane system sized to how the terrace is actually used.

Specialization

  • Mesh-reinforced Acrylic Membrane Waterproofing
  • APP / Torch-applied Bituminous Membrane
  • PU Liquid-applied Seamless Membrane
  • Brickbat Coba with Slope Correction
  • Parapet, Khurra & Drain Mouth Detailing
  • Shrinkage Crack Filling & Polymer Grouting
  • Expansion Joint Treatment

Be it — RCC terrace, sloped roof, sheet roof, podium deck, chajja or open balcony.

Systems & methods

What we actually apply, and where each one fits

Specifying the wrong system is the most common reason waterproofing and paintwork fails early. Here is how we choose.

Mesh-reinforced Acrylic Membrane

A fibreglass or polyester mesh is embedded between coats of elastomeric acrylic. The mesh bridges hairline and future movement cracks instead of tearing over them — this is the system most of our factory and residential clients choose.

Best for:
Terraces with existing hairline cracking and foot traffic
Typical life:
8–10 years

APP Torch-applied Membrane

Heavy-duty bituminous sheet membrane torch-bonded to a primed deck, with overlapped and sealed joints. Highest resistance to standing water.

Best for:
Podium decks, large industrial roofs, terraces that pond
Typical life:
10–15 years

PU Liquid Seamless Membrane

A joint-free elastomeric polyurethane coating with very high elongation. Ideal on complex terraces with many penetrations, pipes and irregular corners.

Best for:
Terraces with plumbing penetrations and irregular geometry
Typical life:
10+ years

Slope Correction & Drain Detailing

No membrane survives standing water indefinitely. We re-screed to establish fall toward outlets and rebuild khurras and drain mouths before any membrane goes down.

Best for:
Terraces where water sits for hours after rain

Our works

Photos from this type of work

Workers embedding fibreglass mesh into elastomeric acrylic membrane on a factory terrace in Avadi
Mesh-reinforced acrylic membrane — factory terrace, Avadi
APP torch-applied bituminous membrane being heat bonded on a podium deck in Chennai
APP torch-applied membrane on podium deck — Chennai
Terrace parapet junction and drain khurra being detailed with polymer mortar before waterproofing membrane
Parapet junction and khurra detailing before membrane
Cement screed being laid to correct terrace slope and eliminate water ponding
Slope correction screed to eliminate terrace ponding

Our associates

Dr. FixitSikaFosrocAsian PaintsBerger PaintsSTP LimitedMYK LaticreteNerolac

FAQ

Questions about this service

What is the cost of terrace waterproofing per sq ft in Chennai?

It depends on the system. Mesh-reinforced acrylic, torch-applied APP membrane and PU coatings sit at different price points, and the condition of the existing slab decides how much preparation is needed. We give a fixed per-sq-ft rate after a free site inspection — no open-ended billing.

How long does terrace waterproofing take?

A typical independent house terrace takes three to five days including surface preparation, curing between coats and a wet test. Larger factory roofs are scheduled around your operations.

Do you give a warranty?

Yes — a written warranty, with the duration depending on the system specified. We also re-scan with the thermal camera after a wet test before handover.

Can waterproofing be done during the monsoon?

Surface preparation and membrane application both need a dry substrate, so we schedule around rain. Emergency leak arrest with PU injection grouting can be done in wet conditions.

CallWhatsAppFree Quote